Sensi thermostat hookup

sensi thermostat hookup

How do I operate the Sensi smart thermostat?

The Sensi Smart Thermostat can be operated through Wi-Fi using the Sensi app or it can be operated at the actual wall unit. Advanced features such as thermostat settings, scheduling and email alerts are only available through the Sensi app.

What is the VAC rating of the Sensi thermostat?

Sensi thermostat is rated for 20-30 VAC. Refer to our system compatibility checker to see if Sensi Thermostats will work for you. Access Sensi smart thermostat from a smartphone or tablet to control your home environment even when you’re far from it. Thank you for your feedback.

How do I learn more about the Sensi system?

You can also learn more by downloading the Sensi Installation Guide which walks you through wiring and connecting to Wi-Fi. If you want to check to make sure the HVAC configurations are correct after installation, refer to this article for instructions on how to configure thermostats.

Do you need jumper wires for Sensi thermostat?

Throw Away Any Jumper Wires Sensi has a jumper wire built into it, and you will not need any jumper wires from your old unit. Choose Wire Terminals Choose the terminal labels that have wires attached to them on your old thermostat here.

How to change thermostat settings in Sensi smart home?

Sensi Smart Thermostat 1 At the thermostat, press Menu. 2 Press Next. 3 At Temperature Scale (°F/°C) settings, press Next. 4 Outdoor settings If you have a heat pump, use up arrow button to set this to “ HP1 ”. ... 5 Press Next. 6 Indoor settings. ... 7 Press Next. 8 Reversing Valve Settings. ... 9 Press Exit.

How do I get the most from my smart thermostat?

Here are some tips and tricks on how to get the most from your smart thermostat. An easy way to conserve energy without sacrificing home comfort is to use smart Wi-Fi thermostat settings and schedules. Sensi™ smart thermostats let you create custom temperature schedules for each day of the week (up to seven independent schedules).

How do I set the temperature on my thermostat?

At the thermostat, press Menu. Press Next. At Temperature Scale (°F/°C) settings, press Next. If you have a heat pump, use up arrow button to set this to “ HP1 ”. If you have an air conditioning unit, set this to AC1 ”. If you have more than one stage cooling, change this to “ HP2 ” or “ AC2 ” to represent this.

What is early start on Sensi thermostat?

In this situation, using the Early Start feature, your Sensi will activate your cooling system at approximately 6:30 a.m. to achieve the desired 70°F by 8:00 a.m Your home cooling system is crucial to your family’s comfort so Sensi thermostat has advanced settings to protect your equipment.

Do I need a common wire for my Sensi thermostat?

The need for a common wire, or “c-wire,” depends on which Sensi thermostat model you have and your system type. The Sensi Wi-Fi Programmable Thermostat works on most combined heating and cooling systems without a c-wire.

Where does the jumper wire come from on a thermostat?

A jumper wire does not originate from behind the wall, but is unique to each thermostat. Sensi thermostat does not use jumper wires. If you have a jumper wire on your old thermostat, discard it and input only the wires from the wall into the Sensi app when prompted during installation.

What if I accidentally clipped the RC/RH jumper on my Sensi thermostat?

If you accidentally clipped the RC/RH jumper on the back of the Sensi thermostat and did not mean to, you will need to re-jumper those two terminals. To create a new jumper for RC/RH, use a short piece of thermostat wire, strip the insulation off both ends of the wire and bend it in half.

How do I connect my Sensi thermostat to my RC/RH?

Sensi thermostat has a built-in RC/RH jumper wire on the back of the thermostat face plate. Clip the RC/RH jumper wire on the Sensi thermostat if you have two separate wires (one running to RH and the other to RC) on your old thermostat that are coming from the wall.

Related posts: